Tools and materials:
* New automatic transmission filter
* Automatic transmission pan gasket
* New sealing ring for the automatic transmission pan plug
* Wrench or wrench with 10 mm head
* 17 mm socket wrench or socket
* Drip tray for collecting automatic transmission oil
* Funnel and hose for filling automatic transmission oil
* Gear oil (it is recommended to use the one recommended by the manufacturer)
Procedure for replacing the automatic transmission filter:
1. Preparation
* Place the car on a level surface and let it cool down.
* Jack up the front of the car and place it on stands.
* Gather the necessary tools and materials.
2. Draining the automatic transmission oil
* Find the automatic transmission pan and place a pan under it to collect the oil.
* Loosen the automatic transmission pan bolts using a 10 mm wrench or socket.
* Carefully remove the automatic transmission pan so as not to spill oil.
3. Replacing the automatic transmission filter
* Carefully remove the old automatic transmission filter from the pan.
* Reinstall the new filter, making sure it fits correctly.
* Clean the surface of the automatic transmission pan and apply sealant or gasket to it.
4. Installing the automatic transmission pan
* Reinstall the automatic transmission pan and tighten the bolts using a 10 mm wrench or socket.
* Replace the sealing ring of the automatic transmission pan plug with a new one.
*Insert the plug and tighten it using a 17mm socket wrench or socket.
5. Filling automatic transmission oil
* Using a funnel and hose, fill the automatic transmission with new oil.
* Fill in the manufacturer’s recommended amount of oil as specified in the vehicle’s owner’s manual.
* Check the automatic transmission oil level and add if necessary.
6. Starting the car
* Start the engine and let it idle for a few minutes.
* Switch the automatic transmission selector to different positions to pump the oil.
* Turn off the engine and check the automatic transmission oil level again. Add oil if necessary.
7. Reset fault codes
*If the fault indicator on the instrument panel is illuminated after replacing the automatic transmission filter, you may need to reset the fault codes. This can be done using an OBD2 scanner or by contacting your dealer.
Adviсe:
* Be sure to use the automatic transmission filter and oil recommended by the manufacturer.
* Tighten the automatic transmission pan bolts and the plug to the torque specified in the vehicle’s operating manual.
* Change the automatic transmission filter regularly in accordance with the manufacturer’s recommendations.
*If you are unsure of your skills, consult a qualified mechanic for assistance.