Toyota Camry automatic transmission repair stages
1. Diagnostics
* Request a detailed medical history from the vehicle owner, including:
* Symptoms and time of their appearance
* Automatic transmission service history
* Inspect underneath the vehicle and check for leaks and damage.
* Scan error codes and interpret them.
2. Disassembly and inspection
* Prepare the vehicle for repair by disconnecting the battery and other components.
* Remove the automatic transmission and disassemble it.
* Inspect all components including:
* Torque converter
* Gears and shafts
* Clutches and steel discs
* Solenoids and valves
3. Cleaning and preparation
* Clean all components and transmission housing.
* Replace worn or damaged parts with new ones.
* Make sure all gears and bearings are in good condition.
4. Assembly and installation
* Assemble the automatic transmission in accordance with the technical data.
* Reinstall the automatic transmission on the car.
* Connect all electrical and hydraulic components.
5. Oil filling and checking
* Fill the automatic transmission with new transmission oil specified by the manufacturer.
* Start the engine and run it to check the oil level and for leaks.
6. Testing
* Carry out a test drive to check that the automatic transmission is operating correctly.
* Make sure that the transmission shifts gears smoothly, without slipping or jerking.
7. Completion
* Reset error counters and perform diagnostics after road test.
* Make sure all gearbox parameters are within specifications.
* Hand over the vehicle to the owner and provide maintenance recommendations.