To adjust the Toyota automatic transmission kickdown cable, follow these steps:
Tools:
* Key or screwdriver
* Measuring tape or ruler
Adjustment procedure:
1. Locate the kickdown cable: Locate the kickdown cable that connects the gas pedal to the automatic transmission throttle valve.
2. Position the vehicle: Stop the engine and place the vehicle in Park (P).
3. Set the gas pedal to the stop: Press the gas pedal all the way to fully open the throttle.
4. Adjust Cable Nut: Locate the adjusting nut on the end of the kickdown cable that connects to the throttle lever. Loosen the nut with a wrench or screwdriver.
5. Adjust the length of the cable: Set the length of the cable so that when the gas pedal is fully pressed, the automatic transmission throttle valve opens to the appropriate amount. This is usually about 1-1.5 cm.
6. Tighten the adjusting nut: After adjusting the cable length, tighten the adjusting nut.
7. Check operation: Start the engine and press the gas pedal. The automatic transmission should change gears smoothly and in a timely manner when you press the gas pedal.
Adviсe:
*Use a measuring tape or ruler to ensure accurate adjustment.
*If you are unsure of the exact throttle position, consult your vehicle’s owner’s manual or a qualified mechanic.
*Check the kickdown cable adjustment periodically to ensure optimal operation of the automatic transmission.