Torque converter oil seal, automatic transmission Matiz
Description:
The torque converter oil seal of the Matiz automatic transmission is a rubber seal that is installed between the torque converter and the gearbox housing flange. It prevents fluid leakage from the torque converter during automatic transmission operation.
Symptoms of malfunction:
A malfunction of the torque converter oil seal can manifest itself in the following symptoms:
* Automatic transmission fluid leaking from under the gearbox
* Low automatic transmission fluid level
* Slipping or jerking when shifting gears
Cause of malfunction:
The torque converter oil seal may fail due to:
*Normal wear and tear
* Damage due to contact with a hot surface
* Deformations due to excessive automatic transmission fluid pressure
Replacing the torque converter oil seal in a Matiz automatic transmission
Replacing a torque converter oil seal is a complex procedure that requires special equipment and skills. It is recommended that you have a qualified mechanic perform this work.
Replacement procedure:
1. Drain the automatic transmission fluid.
2. Remove the automatic transmission pan.
3. Disconnect the torque converter from the gearbox housing flange.
4. Remove the torque converter oil seal from the torque converter or transmission housing flange.
5. Install a new oil seal on the torque converter or transmission housing flange using a special tool.
6. Install the torque converter onto the gearbox housing flange.
7. Install the automatic transmission pan.
8. Fill with automatic transmission fluid.
Recommendations:
* Use only original or high-quality analogues of oil seals.
* Check the automatic transmission fluid level after replacing the oil seal.
* Do not start the engine with a low automatic transmission fluid level.