Setting up a turbo timer for automatic transmission on the StarLine A93 alarm system
1. Turn on the ignition. Do not start the engine.
2. Quickly press the *Jack* button 7 times.
3. Turn the ignition on and off immediately.
4. The siren will give 1 long and 2 short signals. This indicates entering programming mode.
5. Press the *Jack* button 1 time. This will select function 12 (turbo timer).
6. Press the *Jack* button as many times as you want to set the turbo timer to. For example, for 30 seconds, press the *Jack* button 30 times.
7. Turn off the ignition.
The turbo timer will be set for the specified number of seconds.
Note:
* The minimum turbo timer time is 10 seconds.
* The maximum turbo timer time is 60 seconds.
* The turbo timer operates only after the engine is turned off.
* If you turn off the engine before the turbo timer expires, it will be forced to stop.