Autostart from a key fob for automatic transmission using StarLine A93
Requirements:
* Installed and configured StarLine A93 system
* Car with automatic transmission
* Keyless entry or optional immobilizer bypass module
Setting up automatic start from the key fob:
1. Start the engine and disconnect the antenna connector of the StarLine A93 system.
2. Press button 3 of the key fob and hold it until three beeps sound.
3. Press button 1 of the key fob once.
4. Press button 3 of the key fob again.
5. Press button 2 of the key fob.
6. Connect the antenna connector.
Automatic start from key fob:
1. Make sure that the StarLine A93 system is in security mode.
2. Press and hold button 3 of the key fob for 3 seconds.
Cancel automatic start:
1. Press and hold button 3 of the key fob for 3 seconds.
2. Press button 1 of the key fob.
Additionally:
*If your vehicle is equipped with an optional immobilizer bypass module, see the module’s instructions for setup.
* For convenience, you can assign automatic start to button 1 of the key fob instead of button 3.
* The StarLine A93 system also allows you to configure engine start by timer, temperature or other parameters.