Adaptation of Solaris automatic transmission with 4-speed automatic transmission
Tools:
* Diagnostic scanner supporting Hyundai protocol (for example, Hyundai GDS)
Procedure:
1. Warm up the engine and transmission: Start the engine and let it idle for several minutes until it reaches operating temperature.
2. Connect the scanner: Connect the diagnostic scanner to the OBD-II diagnostic connector of the vehicle.
3. Select the desired function: In the scanner menu, find the ‘Automatic Transmission Adaptation’ function.
4. Follow the directions: The scanner will guide you through the step-by-step onboarding procedure. Typically the procedure includes the following steps:
– Reading current automatic transmission settings: The scanner reads current automatic transmission settings, such as gear shift points and torque converter lock-up points.
– Setting comparison: The scanner compares the current settings with factory settings or known optimal settings.
– Adjustment of settings: If the scanner detects large deviations from the factory values, it can make adjustments to optimize the operation of the automatic transmission.
5. Complete the procedure: When the procedure is completed, the scanner will display a message indicating that the adaptation is complete.
6. Clearing error codes: The scanner can detect and clear any error codes related to the operation of the automatic transmission that may have arisen during adaptation.
Note:
* The adaptation procedure may vary depending on the scanner used and vehicle model.
* It is recommended that you consult a qualified mechanic or use a professional scanner to ensure the procedure is performed correctly.