Location of the automatic transmission selector sensor on the Honda Accord 7
The automatic transmission selector sensor on the Honda Accord 7 is located on the side of the transmission housing.
Stages of searching for an automatic transmission selector sensor:
1. Raise the car: Raise the front of the car with a jack and install jack stands for safety.
2. Locate the transmission: Locate the transmission underneath the vehicle. This is a large aluminum housing located behind the engine.
3. Look for the side of the housing: Move to the side of the transmission housing closest to the vehicle’s interior.
4. Inspect the sensor: The automatic transmission selector sensor will be located on the side of the housing and will be connected to a cable or lever that goes to the gear selector in the cabin. The sensor is usually a small black or silver device with an electrical connector.
Additional information:
* The automatic transmission selector sensor converts the position of the gear selector into a cabin electrical signal that is sent to the transmission control module (TCM).
* If the automatic transmission selector sensor is faulty, it may cause the transmission to malfunction or become inoperable.
* Replacing an automatic transmission selector sensor requires special tools and knowledge. It is recommended that you have a qualified mechanic perform this task.