Required materials:
* OBD2 scanner
*Laptop or smartphone with scanner software
Steps to reset Toyota Camry automatic transmission adaptation:
1. Connect the OBD2 scanner to the vehicle’s diagnostic port.
2. Launch the scanner software on your computer or smartphone.
3. Connect to the scanner and select the make and model of your car (Toyota Camry).
4. Go to the “Transmission” or “Automatic Transmission” section in the software.
5. Find the automatic transmission adaptation or training reset function.
6. Select this option and follow the on-screen instructions.
7. Typically the software will ask you to do certain things such as:
* Move the gear shift lever to different positions.
* Start and stop the engine.
* Wait a certain time (for example, 10 minutes).
8. After following the instructions, the software will reset the automatic transmission adaptation.
9. Disconnect the scanner and start the car.
10. Let the car warm up and drive in different driving modes to allow the automatic transmission to re-adapt to your driving style.
Note:
* Resetting the automatic transmission adaptation should only be performed if there are problems with gear shifting or other problems with the automatic transmission.
* Failure to follow instructions may result in damage to the automatic transmission.
*If you have no experience with OBD2 scanners, it is recommended that you consult a professional mechanic.