Reset adaptation of automatic transmission Hyundai Solaris 6-speed
Materials:
* OBD-II scanner
*laptop or tablet with diagnostic software
Procedure:
1. Connect to the car
* Connect the OBD-II scanner to the vehicle’s diagnostic connector.
* Establish a connection between the scanner and your laptop or tablet.
*Run the diagnostic software and establish a connection with the vehicle’s ECU.
2. Identify the automatic transmission
* Go to the “Transmission” or “Automatic Transmission” section in the software.
* Select “Identification” or “Control Unit Information”.
* Make sure the 6-speed automatic transmission is identified.
3. Reset adaptation
* Go to the “Adaptations” or “Special Features” section.
* Find the function “Reset automatic transmission adaptations” or similar.
* Select function and confirm reset.
4. Checking the automatic transmission
*After the reset is complete, let the vehicle idle for a while.
* Check the vehicle for any gear shifting problems.
Additional tips:
*Before performing an adaptation reset, make sure the vehicle is in park mode.
* If the vehicle is malfunctioning or has problematic gear shifting, it is recommended that you first diagnose and repair the problem.
* After resetting the adaptation, it may take some time for the automatic transmission to adapt to the driving style again.
*If you still have trouble shifting after resetting, contact a qualified mechanic.