Required tools and materials:
* New automatic transmission drive oil seal
* 32mm wrench
* Long wrench or pipe
* Pliers
* Screwdriver
* Brake cleaner
* Rags
Steps:
1. Prepare the car. Place the vehicle on a level surface, apply the parking brake, and place it on jack stands.
2. Remove the wheel. Using a 32 mm wrench, unscrew the wheel nuts and remove it.
3. Remove the bolt securing the drive to the hub. Clean the bolt securing the drive to the hub and unscrew it.
4. Disconnect the drive from the hub. Pull the drive outward to disconnect it from the hub.
5. Remove the drive. Pull the drive back to remove it from the transmission.
6. Remove the old oil seal. Using a screwdriver or thin object, carefully remove the old seal from the drive. Clean the drive surface from old oil seal and sealant.
7. Install a new oil seal. Apply a thin layer of sealant to the new oil seal and install it into the groove on the drive. Make sure the seal is installed correctly, with the sealing lip facing out.
8. Reinstall the drive. Insert the drive into the transmission and align it.
9. Connect the drive to the hub. Insert the drive shank into the hub and tighten the mounting bolt.
10. Install the wheel. Install the wheel and tighten the nuts.
11. Check the automatic transmission oil level. Add oil to the gearbox if necessary.
Adviсe:
*Use suitable transmission sealant.
* Make sure the new oil seal is installed correctly and the sealing lip is facing out.
*Use a long wrench or pipe to tighten the drive bolt to ensure proper torque.
* When replacing the oil seal, also check the condition of the drive and other parts located nearby.