Tools and materials:
* New automatic transmission rear cover
* Automatic transmission rear cover gasket
* Transmission fluid
* Container for draining liquid
* Driver or ratchet
* Sockets or socket wrenches
* Hex keys (hex keys)
* Sealant for automatic transmission
Steps:
1. Preparation
* Gather the necessary tools and materials.
* Place the vehicle on a level surface and set the parking brake.
*Remove the battery (for safety).
2. Draining transmission fluid
* Find the automatic transmission drain plug and place a container under it to drain the fluid.
* Loosen the drain plug and drain the liquid.
* Tighten the drain plug.
3. Removing the cardan
* Raise the rear of the car and secure it to supports.
* Disconnect the driveshaft from the automatic transmission and the differential shank flange.
4. Removing the back cover
* Disconnect all electrical connectors from the rear cover of the automatic transmission.
* Using hex keys, loosen the bolts securing the rear cover to the automatic transmission housing.
* Carefully remove the back cover.
5. Installing a new back cover
* Clean the seating surfaces on the automatic transmission housing and the new rear cover.
* Apply automatic transmission sealant to the rear cover gasket.
* Install the gasket on the back cover.
* Install the rear cover on the automatic transmission housing.
*Tighten the rear cover bolts to specifications.
6. Installation of the cardan
* Connect the driveshaft to the automatic transmission and the differential shank flange.
7. Filling transmission fluid
* Pour new transmission fluid into the automatic transmission through the filler hole.
* Check the fluid level and add it as needed.
8. Completion
* Connect all electrical connectors to the rear cover of the automatic transmission.
* Remove the vehicle from the supports.
* Connect the battery.
* Check for transmission fluid leaks.
* Start the engine and check the operation of the gearbox.
Adviсe:
* The use of a new automatic transmission rear cover gasket is mandatory.
* Observe the specified tightening torques when installing the rear cover bolts.
* Check the transmission fluid level after the vehicle warms up and shifts gears.
*If you are unsure of your abilities, seek assistance from a qualified mechanic.