Required tools:
* Flat head screwdriver
* T10 lamp
Instructions:
1. Move the automatic transmission selector to position “P”.
2. Pry off the selector cover using a flat-head screwdriver. Be careful not to damage the cover.
3. Take out the lamp. Press the sides of the cartridge and pull it towards you.
4. Install a new lamp. Insert the new cartridge into the socket and lock it.
5. Reinstall the selector cover. Snap the lid.
Adviсe:
* Use a T10 lamp with a W10W or T10W base.
* Check whether the lamp works before installing the selector cover.
* If the new lamp does not light, check the headlight fuse.
*Always disconnect the battery before performing any electrical work.