Required materials:
* New automatic transmission light (part number: 94302-1H010 or similar)
* Phillips screwdriver
* Plastic lever or coin
Instructions:
1. Disconnect the battery
* For safety, disconnect the negative terminal of the battery.
2. Remove the center console
* Insert a plastic lever or coin into the slot at the rear of the gear shift lever.
* Pry the console up to release the latches holding it in place.
* Disconnect the electrical connectors connected to the console (usually the lights, cigarette lighter, and heated seats).
3. Remove the gear shift unit
*Locate the two screws located on the front of the shift assembly.
* Unscrew the screws using a Phillips screwdriver.
* Gently pull the shift assembly upward to release it from the latches.
4. Replace the automatic transmission light bulb
* Locate the automatic transmission light bulb, which is usually located on the top of the gear shift unit.
* Gently pull the light bulb out of its socket.
* Insert the new light bulb into the socket.
5. Reassemble everything in reverse order
* Install the gear shift unit and tighten the screws.
* Connect the electrical connectors to the center console.
* Click the center console into place.
* Connect the battery.
Adviсe:
* If you have difficulty removing the automatic transmission light bulb, use a cotton swab or thin tweezers.
* When installing a new light bulb, make sure it is inserted correctly into the socket.
* Make sure all screws and electrical connectors are properly tightened.