Required materials:
* New light bulbs for automatic transmission
* Screwdriver (usually Phillips)
* Pliers (optional)
Instructions:
1. Disconnect the battery: Disconnect the negative terminal of the battery to prevent short circuit.
2. Remove the shift panel: Using a screwdriver, remove the screws or bolts holding the shift panel. Gently pull the panel up and disconnect the electrical connectors.
3. Locate the light bulbs: The lights are usually located at the rear of the shifter. They may be hidden under a small plastic covering.
4. Remove old light bulbs: Using pliers, carefully pull the old light bulbs out of their sockets.
5. Insert new light bulbs: Insert new light bulbs into the sockets. Make sure they are inserted correctly and securely.
6. Reassemble the shift panel: Connect the electrical connectors and return the shift panel to its place. Tighten the screws or bolts.
7. Connect the battery: Connect the negative terminal of the battery.
8. Check the backlight: Turn on the ignition and check that the gear selector backlight is on.
Adviсe:
* Use bulbs with the same base type and voltage as the original bulbs.
*If you are unsure of any step, consult the repair manual for your specific vehicle make and model.
*Before starting work, make sure the engine is cool and the parking brake is set.
*If you have any questions, consult a qualified mechanic.