Materials:
* New automatic transmission light (suitable for Toyota Sprinter model)
* Flat head screwdriver
Instructions:
1. Disconnect the battery: For safety, disconnect the negative terminal of the battery.
2. Locate the transmission panel: The transmission panel is usually located under the steering column.
3. Remove the transmission panel: Using a flat-tip screwdriver, pry and remove the decorative panel that covers the transmission panel.
4. Remove screws: Remove the two or three screws that secure the transmission panel to the dashboard.
5. Remove the transmission panel: Gently pull the transmission panel towards you to disconnect it from the dashboard.
6. Locate the transmission light: The transmission light will be located on the rear side of the transmission panel.
7. Pull out the bulb: Squeeze the latch that holds the bulb in place and pull out the bulb.
8. Insert the new bulb: Insert the new bulb into the socket and press it into place.
9. Reinstallation: Reinstall the automatic transmission panel and secure it with screws.
10. Install the trim panel: Place the trim panel in place and press it into place.
11. Connect the battery: Reconnect the negative terminal of the battery.
12. Check operation: Start the car and check if the automatic transmission light lights up properly.
Adviсe:
*When purchasing a new bulb, make sure it is the correct temperature and brightness for your Toyota Sprinter model.
* Do not touch the glass part of the light bulb as this may shorten its life.
*If you have difficulty removing the transmission panel or replacing a light bulb, seek professional help.