Materials:
* New automatic transmission cushion (to match your car model)
* Tool kit (including socket wrenches, screwdriver and pliers)
* Lift or jack and stands
* Solvent and degreaser
* Adhesive to seal the gasket (optional)
Replacement procedure:
1. Preparation
* Place the vehicle on a lift or raise the front end using a jack and stands.
* Disconnect the negative terminal of the battery.
* Remove the engine crankcase protection (if equipped).
2. Removing the old automatic transmission cushion
* Locate the automatic transmission mount under the engine.
* Loosen the airbag mounting bolts using a socket wrench.
* Completely remove the bolts and mount from the engine and gearbox.
* Clean the mounting surfaces with solvent and degreaser.
3. Installing a new automatic transmission mount
* Apply a little adhesive to seal the gasket on the cushion mounting surface (optional).
* Install the new cushion in place and tighten the mounting bolts using a socket wrench to manufacturer specifications.
4. Completion
* Return the engine crankcase protection to its place (if it was removed).
* Connect the negative terminal of the battery.
* Start the engine and check for leaks or vibrations.
Adviсe:
* Check other engine mounts for wear or damage.
*Tighten the cushion mounting bolts by hand, not with an impact tool.
*If you are unsure of your skills, seek professional help.