Materials:
* New electrical kit for your car model
* Tool kit: ratchet wrench, screwdriver, wire strippers, electrical tape
* New fuses and relays (as needed)
* Protective gloves
* Safety glasses
Instructions:
1. Disconnecting the battery:
* Turn off the ignition and allow the car to cool down.
* Open the hood and locate the negative (-) battery terminal.
*Using a ratchet wrench or wrench, loosen the terminal nut and disconnect the terminal from the battery.
2. Dismantling old electrics:
* Determine the location of the main relay, fuses and main wiring harnesses.
* Disconnect all connectors that contain wires.
* Loosen all clamps holding the wiring harnesses.
* Remove the old electrics from the car.
3. Installation of new electrics:
* Install the new main wiring harness, securing it with clamps.
* Connect all connectors to the appropriate components.
* Install head relay, fuse sockets and new fuses.
* Make sure all wires are properly connected and insulated with electrical tape.
4. Battery connection:
* Wear protective gloves and goggles.
* Place the positive battery terminal (+) onto the battery terminal and tighten the nut.
* Place the negative battery terminal (-) onto the battery terminal and tighten the nut.
5. System check:
* Start the car and let it idle for a few minutes.
* Check all headlights, taillights, turn signals and windshield wipers.
* Make sure all electrical components are working properly.
6. Cleaning:
* Remove all tools and materials.
*Check for any loose wires or connectors.
Precautions:
* Always disconnect the battery before starting work.
* Use caution when working with electricity.
* Wear protective gloves and goggles.
*Follow manufacturer’s instructions.
*If you are not confident in your abilities, it is better to contact a professional mechanic.