Required tools and materials:
* Automatic transmission oil seals (quantity depending on model)
* Solvent or brake cleaner
* Rags
* Wrench or socket wrench
* Mounting tool or plastic spatula
* Hammer (optional)
Instructions:
1. Preparation:
* Place the vehicle on a level surface and secure it with the parking brake.
* Disconnect the negative battery cable.
* Drain the oil from the automatic transmission by removing the drain plug.
2. Removing the automatic transmission:
* Disconnect the drive shafts from the automatic transmission.
* Unscrew the engine and automatic transmission mounting bolts.
* Carefully separate the automatic transmission from the engine.
3. Dismantling old oil seals:
* Clean the surface of the automatic transmission around the seals with solvent or brake cleaner.
* Use a pry bar or plastic putty knife to carefully pry and pull out the old seals.
4. Installation of new oil seals:
* Apply a small amount of sealant to the new oil seal.
* Install the new oil seal into the seat.
*Use a hammer (optional) to ????? the oil seal until it is completely seated.
5. Assembly:
* Reinstall the automatic transmission and secure it with mounting bolts.
* Connect the drive shafts.
* Pour new oil into the automatic transmission.
6. Cleaning and inspection:
* Clean any components that have come into contact with sealant or oil.
* Check the system for leaks by starting the engine and changing gears.
Features of different Hyundai Accent models:
* Depending on the model and year of manufacture, the process for replacing oil seals may vary slightly.
*Be sure to check the repair manual for your specific Hyundai Accent model.
*Transverse engine models may require removal of the control arm.
*If the seal is installed on the shaft, a special tool may be required to remove and install it.