Materials:
* New automatic transmission cushion
* 17mm wrench
* Ratchet wrench
* Key extension
* Parts cleaner
* Sealant for automatic transmission pan
Procedure:
1. Preparation
* Place the vehicle on a level surface and secure it with the parking brake.
* Allow the engine to cool.
* Disconnect the negative terminal of the battery.
2. Removing the automatic transmission cushion
* Raise the front of the car using a jack and secure it to the jack stands.
* Find the automatic transmission cushion (located under the automatic transmission).
* Unscrew the bolts securing the airbag to the car frame using a 17 mm wrench.
* Carefully remove the automatic transmission mount.
3. Cleaning and applying sealant
* Clean the mating surfaces of the car frame and the new automatic transmission mount with a parts cleaner.
* Apply a thin layer of automatic transmission pan sealant to the mating surface on the vehicle frame.
4. Installing a new pillow
* Install the new automatic transmission mount in place.
* Tighten the bolts securing the cushion using a 17mm wrench. Tighten the bolts evenly.
5. Lowering the car
* Lower the vehicle from the jack stands.
6. Battery connection
* Connect the negative terminal of the battery.
7. Check
* Start the engine and check for fluid leaks from under the automatic transmission mount.
* Drive a couple of kilometers and check whether the airbag works correctly, dampening vibrations of the engine and automatic transmission.
Adviсe:
* If the automatic transmission mount is severely worn or damaged, it must be replaced as soon as possible, as this can lead to serious problems with the transmission.
* The use of sealant for the automatic transmission pan is necessary to ensure tightness and prevent fluid leaks.
* When tightening the airbag mounting bolts, do not use excessive force to avoid damaging the bolts or threads.
* After replacing the automatic transmission mount, it may be necessary to reset the transmission adaptation to ensure optimal operation of the transmission.