Materials:
* LED lamps for automatic transmission illumination (type T10)
* Plastic tweezers or flat head screwdriver
Tools:
* Gloves
* Safety glasses
Steps:
1. Disconnect the battery:
* Open the hood and disconnect the negative battery cable using a wrench or pliers.
2. Find the automatic transmission illumination panel:
* On the gearshift panel, find the transparent automatic transmission illumination window.
* It is usually located next to the gear shift indicator.
3. Remove the backlight panel:
* Using plastic tweezers or a flat-tip screwdriver, carefully pry and remove the automatic transmission illumination panel.
4. Remove old lamps:
*Press the old bulbs lightly and turn them counterclockwise to remove them.
5. Install new lamps:
* Insert the new LED bulbs into the sockets, aligning them with the guides.
*Turn the bulbs clockwise to lock them in place.
6. Reinstall the backlight panel:
* Align the backlight panel with the hole on the shift panel.
* Press down on the panel to snap it into place.
7. Connect the battery:
* Connect the negative battery cable and tighten it with a wrench or pliers.
Adviсe:
* To ensure uniform illumination, use lamps of the same brand and brightness.
* Always wear protective gloves and goggles when working with electrical components.
*If you have any problems, please consult a professional mechanic.