Materials:
* T5 LED Bulbs (Optional)
* Screwdriver with Phillips bit
* Plastic trim removal tool
Instructions:
1. Disconnect the battery: For safety, disconnect the negative (-) terminal of the battery.
2. Remove the center console:
*Using a plastic trim removal tool, carefully pry and remove the panel around the shift lever.
* Disconnect the electrical connector powering the backlight.
3. Remove the automatic transmission control panel:
* Remove the four Phillips head screws located on the edges of the automatic transmission control panel.
* Gently pull the panel towards you to release it.
4. Replace the backlight bulbs:
* Disconnect the backlight bulbs from the control panel.
* Install new LED bulbs (if desired). If you are using standard light bulbs, skip this step.
5. Reinstall the automatic transmission control panel:
* Insert the control panel back into its slot.
*Tighten the four Phillips head screws.
6. Connect the electrical connector for the backlight:
* Connect the electrical connector to the automatic transmission control panel.
7. Reinstall the center console:
* Install the panel around the gear shift lever.
* Connect the electrical connector that powers the backlight.
8. Connect the battery: Connect the negative (-) terminal of the battery.
Adviсe:
* Before starting work, it is recommended that you read the owner’s manual for your vehicle.
* You can use tweezers or a small wrench to remove the backlight bulbs.
*If you experience any difficulties, please contact a qualified mechanic for assistance.