Tools and materials
* New automatic transmission selector
* Set of socket wrenches
* Flat blade screwdriver
*Pliers (optional)
Instructions
1. Disconnect the battery
Disconnect the negative terminal of the battery to prevent a short circuit.
2. Remove the center console
* Remove the decorative panel around the automatic transmission selector using a flat blade screwdriver or pliers.
* Remove the screws holding the center console and remove it.
3. Disconnect cables
* Disconnect the electrical cables from the automatic transmission selector.
* Disconnect the shift cable cable from the shift lever.
4. Unscrew the fastening bolts
* Unscrew the bolts holding the automatic transmission selector. Usually there are two or three.
5. Remove the old selector
* Carefully remove the old automatic transmission selector from the car.
6. Install a new selector
* Install a new automatic transmission selector in place of the old one.
* Tighten the mounting bolts.
7. Connect cables
* Connect the electrical cables to the new automatic transmission selector.
* Connect the shift cable cable to the shift lever.
8. Install the center console
* Reinstall the center console and secure it with screws.
* Install a decorative panel around the automatic transmission selector.
9. Connect the battery
* Connect the negative terminal of the battery.
10. Check your work
* Start the engine and check the operation of the automatic transmission selector, making sure that it changes gears smoothly and without problems.
Adviсe
* If you are not confident in your mechanical skills, it is recommended to contact a car service to replace the automatic transmission selector.
* Replacing the automatic transmission selector may also require adjustment of the gear shift cable.
* Be careful when handling electrical cables to avoid short circuits.