Tools and materials required to replace the automatic transmission differential bearing on a Kia Ceed:
* Set of socket wrenches
* Hex key
* Hex socket set
* Mounting blade
* Retaining ring remover
* Bearing puller
* New differential bearing
* Automatic transmission oil and filter
* Sealant for automatic transmission
The process of replacing an automatic transmission differential bearing on a Kia Ceed:
1. Preparation
* Set the parking brake and turn off the engine.
* Disconnect the battery.
* Drain the oil from the automatic transmission.
2. Removing the automatic transmission
* Disconnect the wiring harness connectors from the automatic transmission.
* Unscrew the bolts and nuts securing the automatic transmission to the engine.
* Carefully separate the automatic transmission from the engine and move it to a workbench.
3. Disassembling the automatic transmission
* Remove the automatic transmission oil pan.
* Remove all bolts and nuts securing the differential to the transmission housing.
* Carefully remove the differential from the automatic transmission housing.
4. Replacing the differential bearing
* Remove the circlips from the differential shaft.
* Place the bearing puller on the shaft and remove the old bearing.
* Clean the shaft surface from old sealant and dirt.
* Apply new automatic transmission sealant to the surface of the shaft.
* Install the new differential bearing onto the shaft and secure it with retaining rings.
5. Automatic transmission assembly
* Install the differential back into the automatic transmission housing and secure it with bolts and nuts.
* Install the automatic transmission oil pan.
* Fill in new oil and install a new automatic transmission filter.
6. Automatic transmission installation
* Carefully lift the automatic transmission into place and install it on the engine.
* Secure the automatic transmission with bolts and nuts.
* Connect the wiring harness connectors to the automatic transmission.
7. Completion
* Connect the battery.
* Start the engine and check the operation of the automatic transmission.
*Add oil to the automatic transmission if necessary.
Adviсe:
*Make sure you are using the correct type of differential bearing for your Kia Ceed model.
* When disassembling and assembling the automatic transmission, be especially careful not to damage its parts.
* After replacing the differential bearing, it is recommended to diagnose the automatic transmission to ensure its proper operation.