Repair procedure for automatic transmission torque converters Camry 50:
1. Dismantling and disassembly:
* Remove the automatic transmission from the car.
* Unscrew the torque converter from the engine.
* Pull apart the torque converter housing to separate the covers.
* Remove the blades, reactor and other components.
2. Cleaning and inspection:
*Clean all components thoroughly.
* Inspect the torque converter for damage, wear and contamination.
3. Replacement and repair:
* Replace any damaged or worn components such as blades, bearings and seals.
* Repair or replace the reactor if necessary.
4. Assembly:
* Reassemble the torque converter in the reverse order of disassembly.
* Make sure all components are installed correctly and tighten fasteners to the specified torque.
5. Balancing:
* Balance the torque converter to ensure smooth operation.
6. Installation:
* Install the torque converter on the engine and secure it.
* Reinstall the automatic transmission.
7. Testing:
* Start the engine and check if the torque converter operates properly.
* Check for leaks, noise or vibration.
Tools and Equipment:
* Tool kit for automatic transmission repair
* Balancing machine
* Cleaners and degreasers
*Sealants and O-rings
Adviсe:
*Always follow the repair manual for your specific Camry 50 model.
*Use only original or high quality replacement parts.
* Make sure the torque converter is properly installed and balanced for optimal performance.
*If you do not have experience repairing automatic transmissions, it is recommended that you seek help from a qualified mechanic.