Location of automatic transmission oil pressure sensor on Peugeot 206:
1. Open the hood of the car.
2. Find the automatic transmission.
3. The automatic transmission oil pressure sensor is usually located on the side of the transmission or on the transmission sump.
4. The sensor is a small device with an electrical connector.
Procedure for replacing the automatic transmission oil pressure sensor on a Peugeot 206:
Required tools:
* New automatic transmission oil pressure sensor
* Wrench or socket wrench of suitable size (usually 13 or 17 mm)
* Funnel
* New gear oil (optional if added)
Instructions:
1. Place the vehicle on a level surface and secure it with the parking brake.
2. Wait until the engine has cooled down.
3. Disconnect the negative terminal of the battery for safety.
4. Find the automatic transmission oil pressure sensor and disconnect the electrical connector.
5. Using a wrench or socket wrench, unscrew the sensor.
6. Remove the old sensor.
7. Apply a small amount of new transmission oil to the O-ring of the new sensor.
8. Screw the new sensor into place and tighten it to the recommended torque (listed in your vehicle’s owner’s manual).
9. Connect the electrical connector to the new sensor.
10. Check the transmission oil level and add if necessary.
11. Connect the negative terminal of the battery.
12. Start the engine and let it idle to check for leaks.
Note: We recommend that you contact a qualified mechanic if you are unsure about replacing the automatic transmission oil pressure sensor yourself.