Required tools and materials:
* Set of keys or sockets
* Wrenches
* Flat blade screwdriver
* Phillips screwdriver
* New or repaired automatic transmission selector
Procedure:
1. Removing the automatic transmission selector
* Disconnect the negative terminal of the battery.
* Move the gear shift lever to the “Park” position.
* Remove the cover from the gear selector.
* Remove the bolts securing the selector lever to the steering column.
* Disconnect the wiring connector from the selector.
* Remove the selector from the vehicle.
2. Disassembling the automatic transmission selector
* Remove the bolts securing the upper part of the selector housing to the lower part.
* Separate the upper and lower parts of the body.
* Remove the spring and retainer from the gear shift mechanism.
* Remove the gear selector knob.
3. Inspection and repair of the automatic transmission selector
* Visually inspect the selector components for wear or damage.
* Check the spring and retainer for signs of metal fatigue.
*If any part is worn or damaged, replace it with a new one.
4. Automatic transmission selector assembly
* Install the gear selector knob.
* Install the spring and retainer into the gear shift mechanism.
* Connect the upper and lower parts of the body.
* Tighten the bolts securing the housing.
5. Installation of the automatic transmission selector
*Insert the selector into the car.
* Connect the wiring connector to the selector.
* Tighten the bolts securing the selector lever to the steering column.
* Install the gear selector boot.
* Connect the negative terminal of the battery.
6. Functionality check
* Start the engine and make sure that the gear shifts smoothly and without problems.
* Check all gear shift positions including park, neutral, forward and reverse.
Adviсe:
*If you are unsure of your skills, it is best to contact a professional mechanic.
*Remember to disconnect the battery when working on electrical components.
* Use only high-quality spare parts to repair the automatic transmission selector.