Original part number: 34381FG000

Suitable for the following Subaru Forester SG5 models with automatic transmission:

* 2.0XT (2005-2008)
* 2.5XT (2005-2008)

Replacement Part Numbers:

* 34381AJ020

Specifications:

*Outer diameter: 34mm
*Inner diameter: 24mm
* Width: 10 mm
*Material: rubber and steel

Function:

The drive seal serves to seal the connection between the drive and the transmission housing, preventing transmission fluid from leaking and dirt and moisture from getting inside.

Symptoms of a faulty drive seal:

* Transmission fluid leaking from under the oil seal
* Extraneous noise during drive operation
* Reduced handling and vibration

Recommended replacement interval:

The interval for replacing the drive oil seal depends on operating conditions and driving style. It is recommended to inspect and replace if signs of wear or damage are detected.

Important Notes:

* Replacing the drive seal is a complex procedure that requires special tools and knowledge.
* Be sure to use only the original manufacturer’s oil seal or a high quality replacement.
* Do not over-tighten the bolts as this may damage the seal.
* Make sure all surfaces where the seal will be installed are clean and undamaged.

Leave a Reply