Automatic transmission oil pressure sensor AL4 for Peugeot 308
Part Number:
* 1338 C1 (original Peugeot number)
* 9641024380 (replacement number)
Key Features:
*Type: Oil Pressure Sensor
* Compatibility: AL4 gearbox
* Number of contacts: 2
* Voltage: 12V
* Measuring range: 0-10 bar
Description:
The AL4 automatic transmission oil pressure sensor is an important component responsible for monitoring the oil pressure level in the gearbox. It monitors pressure and sends information to the transmission’s electronic control unit (ECU), which uses this information to control the transmission and prevent damage.
Signs of a malfunctioning automatic transmission oil pressure sensor:
* Gearbox slipping
* Jerks and jolts when changing gears
* Oil leak from gearbox
*Opening of an error code related to the oil pressure sensor
Sensor replacement:
Replacing the AL4 automatic transmission oil pressure sensor usually requires special tools and knowledge. Here are the general steps:
1. Make sure the car is parked on a level surface and the engine is turned off.
2. Locate the oil pressure switch on the transmission (usually near the pan or torque converter).
3. Disconnect the electrical connector.
4. Using a suitable wrench or socket, unscrew the sensor.
5. Install the new sensor and tighten it to the specified torque.
6. Connect the electrical connector.
7. Reset error codes (if any).
Price:
The cost of an AL4 automatic transmission oil pressure sensor for a Peugeot 308 varies depending on the manufacturer and source, but usually ranges from $25 to $50.
Note:
AL4 automatic transmission oil pressure sensors may vary in design and compatibility depending on the model and year of manufacture of the vehicle. It is important to purchase the correct sensor for your vehicle.