There is no automatic transmission oil level dipstick in the Nissan Qashqai.

To check the automatic transmission oil level in Qashqai, a special hole is used in the transmission pan, which is closed with a control plug. To check the oil level:

1. Place the car on a flat surface.
2. Start the engine and let it idle for a few minutes.
3. Stop the engine.
4. Open the hood and find the control plug on the automatic transmission pan.
5. Clean the control plug and the area around it with a clean cloth.
6. Unscrew the control plug manually.
7. If oil begins to drip from the hole, then the oil level is normal.
8. If oil does not drip, the oil level is low.
9. Add oil to the gearbox through the special filling hole until it begins to flow out of the control hole.
10. Install the inspection plug and tighten it.
11. Check the oil level again and add oil if necessary.

Leave a Reply