Required materials:
* New oil for automatic transmission Nissan CVT Fluid NS-3 (for CVT gearboxes) or Nissan Matic Fluid D (for traditional automatic transmissions)
* New transmission oil filter
* Transmission drain plug washer
* Funnel for filling oil
* Wrenches or sockets of appropriate size
* Tray for collecting used oil
Replacement steps:
1. Preparation:
* Place the car on a flat surface.
* Allow the engine to cool.
* Raise the front of the car and secure it on stands.
2. Draining used oil:
* Locate the drain plug on the transmission.
* Place a tray under the plug.
* Unscrew the drain plug and drain the used oil into the pan.
* Allow the oil to drain completely.
3. Replacing the oil filter:
*Locate where the transmission oil filter is located.
* Unscrew the bolts securing the filter.
*Remove the old oil filter.
* Clean the seating surface and apply a small amount of new oil to the O-ring of the new filter.
* Install the new filter and tighten the bolts.
4. Filling with new oil:
* Locate the filler plug on the transmission.
* Unscrew the filler plug.
* Insert a funnel into the filler hole and fill in new oil.
* Check the oil level using the transmission dipstick and add if necessary.
5. Completion:
* Install the drain plug with a new washer and tighten.
* Install the filler plug.
* Lower the car.
* Start the engine and let it run for about a minute.
* Check the oil level on the dipstick and add if necessary.
Adviсe:
* Change the oil according to the vehicle manufacturer’s recommendations.
* Use only genuine Nissan automatic transmission oil.
* Check the gearbox oil level regularly, especially after long trips.
* When changing the oil, do not forget to also flush the transmission cooling system.