Location of the automatic transmission lever light in Nissan Tiida:

1. Determine the transmission model: Depending on the model year and configuration, the Nissan Tiida may be equipped with a manual transmission (MT) or an automatic transmission (AT). Information about the transmission model is usually indicated in the vehicle documentation.
2. For automatic transmission (AT):
– Open the hood.
– Find the automatic transmission control unit. It is usually located on the driver’s side of the engine compartment.
– Locate the electrical connector on the automatic transmission control unit.
– Disconnect the electrical connector.
– Press the automatic transmission lever lamp latch and slide it up.
– Remove the lamp.
3. Install a new lamp:
– Insert the new lamp into the socket.
– Press the lamp until it locks into place.
– Connect the electrical connector back to the automatic transmission control unit.
– Close the hood.

Notes:

*The type of lamp used in the Nissan Tiida automatic transmission lever varies depending on the year and model. This is usually a 5W incandescent lamp or an LED lamp.
* When replacing the lamp, it is recommended to wear gloves to avoid getting oil on your hands.
*If you are unsure of your abilities, seek assistance from a qualified mechanic.

Leave a Reply