Location of the Mitsubishi Montero Sport automatic transmission input speed sensor:
The automatic transmission input speed sensor on the Mitsubishi Montero Sport is usually located on the automatic transmission housing, next to the shaft input.
Sensor appearance:
The automatic transmission input speed sensor is usually a small cylindrical component with an electrical connector on one end.
Sensor function:
* The automatic transmission input speed sensor measures the speed of rotation of the transmission input shaft.
* This data is used by the electronic transmission control system (TCM) to determine the gear ratio to be used at that time.
Problems associated with the automatic transmission input speed sensor:
* Malfunctions of the automatic transmission input speed sensor can lead to:
* Rough gear shifts
* Transmission slippage
* Delays when shifting gears
* Errors on the instrument panel
Replacing the automatic transmission input speed sensor:
1. Remove the negative terminal of the battery.
2. Locate the automatic transmission input speed sensor.
3. Disconnect the electrical connector from the sensor.
4. Unscrew the sensor using a suitable tool.
5. Clean the sensor seat.
6. Install the new sensor and tighten it.
7. Connect the electrical connector to the sensor.
8. Install the negative battery terminal.
Adviсe:
* Use a quality sensor from a trusted manufacturer.
* Keep it clean when replacing the sensor to prevent dirt from entering the transmission.
* It is recommended to replace the sensor according to the manufacturer’s instructions or as needed.