Removal
1. Disconnect the negative terminal of the battery.
2. Remove the engine shield (if equipped).
3. Remove the left front wheel.
4. Remove the brake caliper and hang it on a wire.
5. Unscrew the wheel hub mounting bolts and remove it.
6. Unscrew the bolts securing the left drive to the gearbox and remove it from the gearbox.
7. Remove the left drive oil seal from the gearbox housing.
Installation
1. Install a new left drive oil seal on the transmission housing.
2. Insert the left drive into the gearbox and tighten the mounting bolts.
3. Install the wheel hub and tighten the mounting bolts.
4. Install the brake caliper and tighten the mounting bolts.
5. Install the left front wheel.
6. Install the engine guard (if equipped).
7. Connect the negative terminal of the battery.
Required Tools
* Wrench set
* Screwdriver
* Pliers
* Wire
lead time
Approximately 1-2 hours
Notes
* When removing the left drive oil seal, be careful not to damage the transmission housing.
* Before installing a new oil seal, lubricate it with transmission oil.
* After installing a new oil seal, check the transmission oil level in the gearbox and, if necessary, add it to the required level.