Controlling an automatic transmission in a Toyota Land Cruiser 200
Selector position
* P (Park): Locks the transmission, allowing you to park your vehicle safely. Use this position only when coming to a complete stop.
* R (Reverse): Activates reverse gear.
* N (Neutral): Disconnects the transmission from the engine, allowing the vehicle to move freely. Use this position when towing or to save fuel when idling.
* D (Drive): Normal driving position for most conditions. The transmission automatically shifts between gears as speed changes.
*S (Sport): Holds gears longer for a sportier ride.
* M (Manual): Allows you to manually change gears using the selector in the “+” and “-” positions.
Using a selector
* To move the selector lever from position P, R or N to D, S or M, press the brake pedal.
* To move the selector from D, S or M to R or P, press and hold the selector release button.
* To move the selector from D to S or M, press the selector forward or backward.
* To change gears manually in M mode, press the selector up (+) or down (-) to upshift or downshift, respectively.
Driving Modes
* ECO (available on some models): Optimizes transmission performance to save fuel.
* NORMAL (default): Provides a balanced transmission between fuel economy and performance.
*POWER (available on select models): Improves acceleration and performance by shifting gears earlier.
Adviсe
*Use D mode for most driving conditions.
*Use S mode for a sportier ride or when towing light loads.
* Switch to M mode only when necessary, such as when towing heavy loads or driving in the mountains.
* Do not shift from D to M or vice versa until the vehicle has come to a complete stop.
*Service the transmission regularly according to the manufacturer’s recommendations.