Possible reasons for kicks in the Hyundai Creta automatic transmission:
1. Low transmission fluid level:
* Leakage or evaporation of liquid over a long period of time
* Late replacement of fluid according to schedule
2. Dirty transmission fluid:
* Oil filter clogged with dirt and debris
*Fluid was not changed as scheduled
3. Wear of transmission parts:
* Worn or damaged clutches
* Faulty solenoids
* Burnt out clutch packs
4. Problems with the transmission control unit (TCU):
* Errors in TCU operation
* Faulty electrical connections
5. Problems with the torque converter:
* Worn lock-up clutch
* Clogged or dirty torque converter filter
6. Front wheel drive slipping:
* Worn or damaged front wheel drive
* Faulty bearings or seals
7. Engine problems:
*Low compression or engine failure may result in insufficient power to shift smoothly
What to do if the Hyundai Creta automatic transmission kicks:
1. Checking the fluid level:
* Check the fluid level using the dipstick. It should be between the “Min” and “Max” marks.
2. Fluid replacement:
* Drain the old fluid and replace it with new fluid according to the manufacturer’s recommendations.
* Replace oil filter if applicable.
3. Diagnostics:
*Connect a diagnostic scanner to the vehicle to read trouble codes (DTCs).
*Perform a physical inspection of the transmission for leaks, damage, or signs of wear.
4. Repair:
*Depending on the problems identified, it may be necessary to replace worn parts, repair the TCU, or repair engine problems.
Important: Kicks in the transmission can cause serious damage, so it is recommended to immediately contact a service center for diagnosis and repair.