Removal:
1. Raise the car on a lift or place it on stands.
2. Drain the automatic transmission fluid.
3. Unscrew the bolts securing the automatic transmission pan.
4. Carefully pry the pan with a screwdriver and separate it from the automatic transmission housing.
5. Remove the gasket.
Installation:
1. Clean the seating surfaces of the pan and the automatic transmission housing.
2. Install a new gasket on the pan.
3. Press the pan against the automatic transmission housing and tighten the fastening bolts.
4. Fill the automatic transmission with fluid.
Adviсe:
* Use a new gasket as the old one may be damaged or deformed.
* Tighten the fastening bolts evenly to avoid deforming the pallet.
* Before installing the pan, it is recommended to apply a thin layer of sealant to the gasket. This will help ensure a tight connection.
* After installing the pan, check the fluid level in the automatic transmission and add it if necessary.