Materials:
* New light bulb for automatic transmission selector
* Flat head screwdriver
Instructions:
1. Disconnect the battery: For safety, it is recommended to disconnect the negative terminal of the battery.
2. Find the automatic transmission selector panel: It is usually located at the bottom of the center console.
3. Pull the panel down: Using a flathead screwdriver or other thin object, carefully pry the bottom edge of the transmission selector panel and pull it down. It should pop out easily.
4. Disconnect the connector: Locate the electrical connector connected to the back of the panel. Press the latch and disconnect the connector.
5. Remove the light bulb: The light bulb is usually secured with a plastic clip or clip. Gently press the clip or pull the latch to remove the bulb.
6. Install the new light bulb: Insert the new light bulb into the socket and secure it in place.
7. Connect the connector: Connect the electrical connector to the automatic transmission selector panel.
8. Replace the panel: Align the panel with its location on the center console and push it until it snaps into place.
9. Connect the battery: Connect the negative terminal of the battery if you disconnected it.
Adviсe:
*Use the same type of bulb as the original one.
* Be careful not to damage the selector panel or wires.
*If you have difficulties, seek professional help.