How to use the automatic transmission selector correctly:
1. Parking mode selection (P)
* Make sure the car has come to a complete stop.
*Press the brake pedal.
* Move the selector to position «P».
* Remove the ignition key.
2. Reverse mode selection (R)
*Press the brake pedal.
* Move the selector to the «R» position.
* Release the brake pedal and gently press the gas pedal.
3. Neutral position selection (N)
*Press the brake pedal.
* Move the selector to the «N» position.
* The brake pedal can be released.
4. Select driving modes:
* Drive (D): Normal driving mode for forward driving.
* Low (L): For low speed driving, such as maneuvering or off-road driving.
* Manual (M): Allows you to manually change gears (if equipped).
* Sport (S): Modifies the behavior of the engine and transmission for a sportier driving experience.
* Eco: Optimizes transmission performance to save fuel.
5. Gear shift (manual models only)
* Accelerate to the desired speed.
* Release the gas pedal.
* Move the selector to a higher or lower position.
*Press the gas pedal.
Tips for using the automatic transmission selector:
* Never shift to «P» or «R» while driving.
* Do not leave the vehicle with the engine running in the «N» position.
* Don’t change gears too quickly.
* If the selector lever is stuck, try moving it to the «N» position and turning on the engine again.
*Refer to your vehicle’s owner’s manual for specific instructions on automatic transmission operation.