Starting the engine:
1. Press the brake pedal.
2. Move the selector to the “P” (park) position.
3. Insert the ignition key.
4. Turn the key to the «ACC» position.
5. Wait until all indicators go out.
6. Turn the key to the «ON» position.
7. Press the engine start button.
Switching modes:
*P (Parking): Used to park the vehicle when the engine is turned off.
* R (Reverse): Used to move the vehicle backwards.
* N (Neutral): Used when the vehicle is stationary and the engine is running.
* D (Drive): Used for normal forward movement.
* M (Manual Mode): Allows you to change gears manually.
Moving forward:
1. Press the brake pedal.
2. Move the selector to position «D».
3. Release the brake pedal and press the accelerator pedal.
4. The car will start moving.
Reverse movement:
1. Press the brake pedal.
2. Move the selector to the «R» position.
3. Wait until the car comes to a complete stop.
4. Release the brake pedal and press the accelerator pedal.
5. The car will start moving backwards.
Manual mode (if available):
1. Move the selector to the «M» position.
2. Press the «+» or «-» button to change gears.
3. You can also use paddle shifters.
Important Reminders:
*Always press the brake pedal before changing modes.
* Do not switch to «R» (reverse) mode while driving.
* Do not leave the car in «N» mode on a slope.
* When parking the vehicle in P mode, be sure to apply the parking brake.
*Follow the instructions in your vehicle’s owner’s manual for more information and recommendations.