Correct use of automatic transmission robot:
Starting the engine:
* Depress the brake pedal fully.
*Turn the ignition key to the “Start” position (or press the start button on vehicles with keyless entry).
* Release the key/button after starting the engine.
Gear shift:
*Mode D (Drive): For forward driving. The transmission automatically shifts to higher gears as speed increases.
* R mode (reverse): For moving backwards.
* S (Sport) mode: For a sportier driving experience, the transmission keeps lower gears for better acceleration.
* M Mode (Manual): Allows the driver to manually change gears using the steering wheel paddles or gear lever.
Gear shift control:
* To shift gears from P (Park) to R, N (Neutral) or D, press the button on the gear shift lever and slide it to the desired position.
* To change gears from R, N or D to M, press the button on the gear shift lever twice.
* To shift up (in M mode), press the right steering wheel paddle or slide the gear lever forward (+).
* To downshift (in M mode), press the left steering wheel paddle or slide the gearshift lever back (-).
Stopping the engine:
* Depress the brake pedal fully.
* Move the gear shift lever to P (park).
* Release the brake pedal.
* Stop the engine.
Other tips:
* Do not hold the brake pedal for a long time when driving. This can cause the brakes to overheat and shorten their life.
* Avoid sudden acceleration and braking. This can lead to premature wear of the clutch and other components.
* Check the transmission fluid level and clutch condition regularly.
*Follow manufacturer’s recommended maintenance intervals and fluid changes.