Chevrolet Lacetti automatic transmission control
Gear shift lever
* P (parking): Locks the wheels when parking on a level surface.
* R (reverse): Reverse gear.
* N (neutral): Neutral, gear open.
* D (Drive): Normal driving mode, automatic gear shift.
*3: Limits upshifts.
*2: Limits shifting to the two highest gears.
* L (low): Only for steep ascents or descents.
Operation
1. Starting the engine: Make sure the gear shift lever is in position P or N and press the brake pedal. Start the engine.
2. Shifting gears: To change gears, simply move the lever from one position to another. No need to press a button or use a clutch.
3. Driving: Release the brake pedal and gently press the gas pedal to start driving.
4. Braking: Press the brake pedal to slow down or stop the vehicle.
5. Parking: Move the lever to position P and apply the parking brake.
Tips for use
* Avoid sudden acceleration and gear changes.
* Check the level and condition of the transmission fluid regularly.
* When changing gear while moving, do not hold the vehicle in place using the gas pedal.
* Do not move the lever to the P position while driving.
*If the vehicle is stuck in snow or mud, use the L position for additional traction.
*When driving on steep slopes, use position 2 or L for better control.
* In an emergency situation where the engine cannot be started in P or N, the transmission can be woken up. To do this, press and hold the brake pedal and move the lever to position N, then again to position P.