Instructions for using automatic transmission:
1. Starting the engine:
* Make sure the gear selector is in Park (P).
*Press the brake pedal.
* Turn the ignition key to start the engine.
2. Gear shift:
* To change gears using the selector lever:
*Press the lever lock button, if equipped.
* Move the selector lever to the desired position:
*P (Park): Holds the vehicle in place and is used when the engine is off.
* R (Reverse): To move backwards.
* N (Neutral): The gearbox is not engaged, the vehicle can roll freely.
* D (Drive): For standard forward movement.
*S (Sport Mode): For more responsive acceleration and shifting at higher revs.
* L (Low): For off-road use or when towing a heavy load.
*To change gears using steering wheel paddle shifters (if equipped):
*Press the right paddle to shift to a higher gear.
*Press the left paddle to shift to a lower gear.
3. Movement:
* Take your foot off the brake pedal and gently press the accelerator pedal to start driving.
* As the car accelerates, it will automatically change gears.
4. Braking:
* Press the brake pedal to slow down or stop the car.
* When the vehicle comes to a complete stop, it will automatically shift into the Park (P) position.
5. Engine shutdown:
* Stop completely.
* Move the selector lever to the Park position (P).
* Turn off the engine.
Adviсe:
* Do not change gears while driving unless necessary.
* Do not shift to neutral (N) when driving downhill or uphill.
* Use Sport Mode (S) for better acceleration when overtaking or climbing steep hills.
*Use Low Gear (L) only in off-road conditions or when towing a heavy load.
* Check the transmission fluid level regularly and top up if necessary.