For vehicles with automatic transmission (AT)
You will need:
* Thread tap M10x1.5
* Collar
* 22mm socket
* Power drill or impact wrench
Steps:
1. Turn off the engine and put the car on the parking brake.
2. Pour thread locker such as Loctite into the bolt threads.
3. Screw the tap into the bolt thread using a driver.
4. Insert the 22mm socket into the tap and secure it.
5. Use a power drill or impact wrench to remove the bolt by turning it counterclockwise.
Notes:
*Be sure to use the correct size tap and socket.
* Make sure the thread lock is installed correctly.
* Apply slight force when tightening the tap to avoid stripping the thread.
*Be patient as it may take some time to remove the bolt.
* If the bolt does not budge, consult a mechanic.