Materials:
* 12mm wrench
* Flat head screwdriver
*If necessary: new automatic transmission selector gasket
Instructions:
1. Remove the center console.
*Use a flathead screwdriver to remove the trim around the shift lever.
* Remove the screws that secure the center console and remove it.
2. Disconnect the automatic transmission selector cable.
* Locate the automatic transmission selector cable that runs from the gear lever to the gearbox.
* Disconnect the cable by pressing the button or clamping the ring.
3. Remove the gear shift lever.
* Unscrew the nut that secures the gear shift lever.
* Remove the gear shift lever along with the boot.
4. Remove the old automatic transmission selector.
* Press the latch and remove the automatic transmission selector lock.
* Remove the old automatic transmission selector.
5. Install a new automatic transmission selector.
* Place the new automatic transmission selector into the housing and secure it with the lock.
6. Install the gear shift lever.
* Place the gear shift lever on the automatic transmission selector and tighten the nut.
7. Connect the automatic transmission selector cable.
* Connect the automatic transmission selector cable by pressing the button or snapping the ring.
8. Install the center console.
* Reinstall the center console and tighten the screws.
9. Install the decorative trim.
* Install the trim around the gear shift lever.
10. Check the operation of the automatic transmission.
* Start the engine and check the gear shift.
Adviсe:
* If you have difficulty setting up the automatic transmission selector, seek professional help.
*If you are replacing the automatic transmission selector gasket, make sure it is positioned correctly.
* Do not over-tighten the shift lever nut as this may damage the mechanism.