Method for resetting Volvo automatic transmission adaptation using a diagnostic scanner:
1. Connect the diagnostic scanner to the vehicle’s OBD2 diagnostic connector.
2. Turn on the ignition.
3. Select the automatic transmission section in the scanner menu.
4. Select the “Adaptation reset” function.
5. Follow the instructions on the scanner screen.
Method for resetting Volvo automatic transmission adaptation without a diagnostic scanner:
For Volvo cars from 2001 to 2007:
1. Turn off the ignition.
2. Press and hold the brake pedal.
3. Insert the key into the ignition and turn it to position “II”.
4. Keep the brake pedal depressed for 15 seconds.
5. Release the brake pedal and turn the key to position “0”.
6. Wait 30 seconds.
7. Start the engine and let it idle for 5 minutes.
For Volvo cars from 2008 and newer:
1. Turn off the ignition.
2. Press and hold the “Start” button on the center console.
3. Simultaneously press and hold the gas pedal.
4. Keep the “Start” button and the gas pedal pressed for 15 seconds.
5. Release the “Start” button and the gas pedal.
6. Wait 30 seconds.
7. Start the engine and let it idle for 5 minutes.
Adviсe:
* Make sure your car battery is fully charged.
* Reset automatic transmission adaptation only if necessary.
*After resetting the automatic transmission, it may take several days of driving for the transmission to adjust to your driving style again.
*If you encounter any problems resetting the automatic transmission, consult a qualified mechanic.