Method 1: Disconnecting the battery
1. Set the vehicle to the parking brake.
2. Open the hood and disconnect the negative battery terminal.
3. Leave the car for 10-15 minutes.
4. Connect the negative terminal of the battery.
5. Start the car and let it warm up at idle for 5-7 minutes.
Method 2: Using a diagnostic scanner
1. Connect the diagnostic scanner to the vehicle.
2. Select the automatic transmission adaptation reset function.
3. Follow the scanner instructions to complete the procedure.
Method 3: Reset using driving procedure
1. Start the car and let it warm up.
2. Switch the gear lever to manual mode.
3. Press the accelerator pedal and accelerate quickly to a speed of approximately 60 km/h.
4. Release the accelerator pedal and allow the vehicle to slow to a stop under engine braking.
5. Repeat steps 3 and 4 several times.
6. Move the gear shift lever to the park position and turn off the engine.
Note:
* After resetting the automatic transmission adaptation, it will take some time to relearn.
* During the driving procedure, be careful and follow the traffic rules.