Via diagnostic scanner:
1. Connect the diagnostic scanner to the vehicle’s OBD-II port.
2. Access the Transmission Control Module (TCM).
3. Find the automatic transmission adaptation reset function.
4. Follow the instructions on the scanner screen to reset.
Manual method:
1. Start the engine and warm it up to operating temperature.
2. Shift the transmission to “P” (Park).
3. Press and hold the brake pedal for 10 seconds.
4. Place the transmission in position “R” (Reverse) and hold for 10 seconds.
5. Repeat steps 3 and 4 two more times.
6. Turn off the engine and wait 1 minute.
7. Start the engine again and check if the problem with the automatic transmission is resolved.
Additional tips:
* Before resetting the automatic transmission adaptation, make sure that there is enough transmission fluid in the transmission.
* After resetting the automatic transmission adaptation, it may take some time for the transmission to relearn.
* If the problem with the automatic transmission is not resolved after resetting the adaptation, contact a car service for further diagnosis and repair.