Materials:
*Torx T30 screwdriver
Steps:
1. Place the gear shift lever in Park (P) position.
2. Press the shift lever lock button in the center console.
3. While keeping the lock button pressed, pull the shift knob up and away from the shaft.
4. Using a T30 Torx screwdriver, remove the three screws at the top of the plastic shaft.
5. Carefully remove the plastic shaft from the lever.
6. Press the lock at the bottom of the lever and remove the handle.
Adviсe:
* Be careful when removing the handle to avoid scratching it or surrounding surfaces.
*If you don’t have a T30 Torx screwdriver, you can use a hex key of the same size.
*To install the new handle, follow the steps in reverse order.