Materials:
* Flat head screwdriver
* 10 mm wrench
Instructions:
1. Shift the gear shift lever to Park (P).
2. Pull the transmission handle release button and simultaneously press the button on the side of the handle.
3. Remove the top part of the handle by pulling it up.
4. Locate the two Phillips screws at the bottom of the handle.
5. Remove these screws using a flat head screwdriver.
6. Carefully remove the handle from the gear selector rod.
7. Pull the new gear lever through the gear selector rod.
8. Insert two screws into the holes on the bottom of the handle and tighten them with a flat-head screwdriver.
9. Reinstall the top of the handle by pressing it until it snaps into place.
10. Verify that the handle operates correctly by moving it between all positions.